Portland Percussion Music Supply
168 Yarmouth Rd, Gray ME 04039
Maine's music superstore has been Maine's leader in music retail for for over 30 years.
we specialize in overseas shipping
Laney Lionheart L50H
Lionheart represents everything Laney has learned through over forty years of Laney tube heritage, distilled into a single amplifier range. Lionheart amplifiers are designed to provide the ultimate in British made, boutique tone. The evocative sound of power tubes being pushed to their sweet spot at volume levels that are controllable is a major feature. Featuring the purest of designs. The combination of EL84 loaded single ended Class A power stages and premium Celestion and Jensen speakers put this family of amplifiers a class apart from the rest.
The Lionheart L50H represents a significant advance in Class A guitar tone – it’s totally unique. The worlds first 50 Watts RMS Single Ended true Class A all valve amplifier.
When we say unique we mean unique in the following ways:-
*UNIQUE in that it is the first 50-watt RMS parallel single-ended Class-A amplifier!
*UNIQUE in that it is the first to use 5 x EL34 output tubes!
*UNIQUE in that its progressive distortion produces a smooth, emotional response to a players touch.
*Unique in the fact that its 5th order harmonic content makes it sound as sweet as any amp you can imagine, when you hit it hard.
*Unique in that it uses ultra modern transformer technology to produce an amplifier that until today other manufactures have only dreamt about.
The L50H features a logically laid out, stylishly clean pre amp design. Featuring a twin channel layout with independent volume for each channel, a shared three band passive EQ, a bite switch, a global tone control and a Dynamics control. All housed in a stylish marine ply cabinet finished with blue tolex and tan front fret.
The Lionheart L50H’s BITE control tightens up the bottom end giving a clean and clear punchy sound, whilst the tone control works in a similar fashion to the Tone controls on your guitar except that it works uniquely on the other end of the amplification chain. Giving you the ability to control not only the overall top end response but also reduce the upper end harmonics on the output stage and preamplifier overdrive sounds.
The DYNAMICS control allows you to control the Lionhearts low frequency response dialling clockwise gives a more extended low-end response. Dialling the Dynamics control anticlockwise tightens up the low-end response.
The L50H rear panel features an FX loop with Bypass/Insert/Side Chain operation modes with a level control, the footswitch socket as well as housing the Preamp Out/Power amp in sockets along with the speaker connections for 8 & 16 Ohm cabinets.
Dave Hirons – Technical Director
The L50H uses well-proven preamplifier topology from the existing Lionheart range – but the output stage is something totally new.
The design of the new output section evolved in house culminating in an output section whose inspiration is taken from the vintage amplification but with added contemporary features – a massive ultra wide bandwidth output transformer which avoids adding any unwanted distortion anywhere within the sonic range
“The Lionheart L50H delivers a totally unique, airy, almost three dimensional, truly intoxicating valve tone”.
THE FINISHING TOUCH
Each Lionheart L50H features a hand stamped ‘build number’ in the order they come off the Laney production line, and comes with a custom made ‘Lionheart’ dust cover.
The Lionheart L50H is a modern classic in both looks and tone, designed and manufactured with pride, in Great Britain.
Inputs: Gold Plated PCB's and Jacks, Hi & Low gain inputs
Power: 50 Watts
Channels: Two channels
Channel Controls: Passive BASS, MIDDLE and TREBLE
Equalisation: Tone Boost & Cut Active on top end of signal) Dynamics (active on lower end of signal)
Preamp Valves: 3 ECC83/12AX7
Output Valves: 5 x EL34 power tubes
Class: Pure Single ended Class A valve tone
Reverb: Yes - high quality digital reverb
Footswitch: Dedicated Lionheart Footswitch included
Speaker connections: 8/16 Ohm socket with switch
FX Loop(s): Insert Type - switchable - Bypass, 0dBu, - 10dBu (nominal)
Impedance: 8/16 Ohm socket with switch
Cabinet Design: Birch Plywood cabinet construction for optimum sound quality and road worthiness
Cover: Supplied with custom embroidered slip cover
Weight: 23 Kg Packed, 21.5 Kg Unit
Packed Dimensions: (HxWxD mm) 328 x 825 x 325
Unit Dims - for int. case: (HxWxD mm) 286 x 678 x 253
got questions? .... we're not just some e commerce web site or a corporation run music store with 800 numbers and outsourced call centers. we're a real music store in business for over 30 plus years, owned and operated by working musicians. we have a very knowledgeable, NON COMMISSIONED sales staff. feel free to call us at 207 775 2230 with questions and we'll be happy to help you choose the right piece of gear for your needs